//PDP establishment failed due to iface bring failed. I will transfer the case to our DS team to check further and comment.
15:27:56.050 cmwsups.c 1650 H =CM= sups_cmd=4, route=0
15:27:56.050 cmipapp.c 6206 H =CM= Found ICS app 1
15:27:56.053 IMSSupplementaryService.cpp 1265 H IMSSupplementaryService::ProcessSSRequest req type 4 bs code- 0 codetype - 0
15:27:56.055 IMSSupplementaryService.cpp 2121 M IMSSupplementaryService ProcessRequest | Timer Started
15:27:56.055 qpDcm.c 8391 M IMS_APP#>>#DPL_M#0#qpDcmEstablishPDPConnection
15:27:56.055 qpDcm.c 8494 H qpDcmEstablishPDPConnection | pDcmProfile=89fb9210 dsAppID=27
15:27:56.055 qpDcm.c 8517 H qpDcmEstablishPDPConnection - APNName --> Three.co.uk, Resolved APN -->
15:27:56.055 qpDcm.c 8519 H qpDcmEstablishPDPConnection - 3GPP ProfileNumber --> 1 | 3GPP2 ProfileNumber --> -1 | IPType --> 2
15:27:56.066 ps_route.c 1658 E ps_route_network_selection_by_policy(): Routing failed net_down_reason: 0x200d2 acl_deny_reason: -36
15:27:56.066 ps_route.c 3451 M ps_route_bring_up_iface_by_policy_ex(): bringup: failed to find Iface
15:27:56.066 NetPlatformLib.cpp 2815 E NetPlatform::IfaceBringUpByPolicy(): Bringup failed, err 114325339
15:27:56.066 ds_Net_NetworkActive.cpp 204 M NetworkActive::BringUpInterface(): Failed to bring up iface, obj 0x8A892A88
15:27:56.067 DSS_NetActive.cpp 278 E DSSNetActive::Init(): CreateNetwork() failed: 114325339
15:27:56.067 DSS_NetApp.cpp 330 E DSSNetApp::CreateNetActive(): Failed to init DSSNetActive: 114325339
15:27:56.067 qpDcm.c 8531 E DPL_M#$$#0#qpDcmEstablishPDPConnection - dsnet_start failed [-1]
15:27:56.067 PDPHandler.cpp 491 E PdpActivate EstablishPDP FAIL
15:27:56.067 PDPHandler.cpp 574 H CPDPHandler ===== EventPdpFailure entry state 1 | This Instance Value[1]
15:27:56.069 cmipsups.c 624 H =CM= cmipsups_interrogate_conf_proc: retry duration: 0 , error code: 1, error tag : 144
15:27:56.069 IMSSupplementaryService.cpp 4624 H IMSSupplementaryService::DeRegCMCallback Call Back Un-Registered
15:27:56.069 ims_reg_service_status.cpp 1741 H ims_update_service_status | Changing UT Service Status From 2 to 0
|